Product Change Notes

Change in automatic slack adjusters 11.3.2011/P20002

Change in the brake lining material 18.6.2010/P20001

Change in the ABS sensor 13.11.2008/P13004

Change in the input and output drive flange sealing in the 10/11 ton through drive axles 23.9.2008/P17003

Change in the lock plate of the wheel hub nut in heavy rigid and steer hub reduction drive axles 12.5.2008/P18001

Slack adjuster reinforcement in rigid truck rear axles 7.11.2007/P17004G

Change in the input and output drive flange sealing in the heavy through drive axles 8.3.2007/P14003

Change in the input drive flange sealing 8.3.2007/P13005

Change in the axle shafts of the 13/16 ton rigid rear axles 26.2.2007/P17001

Change in securing the s-cam shaft seal to the bearing housing in the rigid truck axles 8.2.2007/P17002

Change in the axle housings of the 13/16 ton rigid rear axles 8.9.2006/P16003

Change in the wheel hubs in the 12/14 ton drive and non-drive steer axles and in the 14 ton rigid drive axles 21.8.2006/P16002

Change in the colour of the priming paint in the axle assemblies 4.8.2006/P16001

Change in the slack adjusters in rigid truck rear axles 25.2.2006/P14004

Change in the oil lubracation pump installation 2.3.2005/P15001

Change in the design of the wheel hub casting 16.11.2004/P14002

Change in the differential pinion thrust washers 4.2.2004/P14001

Changes in the brake drums 2.12.2003/P13003

Change in the brake lining material 12.11.2002/P12001

Change in the king pin bearings 14.5.2002/P8001B

Change in brake drum part number in 12, 14 and 18 ton steering axles with wedge brakes 13.12.2001/P11002